1314 Series, 2 way solenoid valves, General Purpose, Normally closed

Main characteristics

Normally closed.

Servo operated or combined action (hung piston)

Bronze, stainless steel body.

BSP o NPT threaded connection.

Brass, stainless steel servopiston, among others.

Seals and seats: acrylo-nitrile for neutral fluids up to 80º and teflon up to 180º.

Seals and seats: neoprene, ethyl-propylene and viton for other uses.

Class F or class H coils coated with glass fiber and insulating impregnation. Interconnection cables.

Internal general use housing.

3/4″ NF electric connection.

Options:

· Explosion and / or weather proof housing.

· Manual operation on the principal orifice.

Technical Specifications

f Connect. f Passage mm. Kv Coef. m3/h Weight in Kg. Maximum temperature and catalog Nº according to seat material Acrylo – Nitrile NeopreneÒ Ethylpropylene VitonÒ TeflonÒ 80ºC 80ºC 150ºC 180ºC 180ºC Bronze body – Hung piston – Minimum Dp: 0 bar – Maximum Dp: 7 bar. 3/4″ 19 6 4 1314BA06A 1314BN06A 1314BE06A 1314BV06A 1314BST06A 1″ 26 10 4,9 1314BA08A 1314BN08A 1314BE08A 1314BV08A 1314BST08A 1,1/2″ 32 15 6,5 1314BA12A 1314BN12A 1314BE12A 1314BV12A 1314BST12A 2″ 38 23 7,3 1314BA16A 1314BN16A 1314BE16A 1314BV16A 1314BST16A Bronze body – Free piston – Minimum Dp: 0,1 bar – Maximum Dp: 15 bar. 3/4″ 19 6 4 1314BA06 1314BN06 1314BE06 1314BV06 1314BST06 1″ 26 10 4,9 1314BA08 1314BN08 1314BE08 1314BV08 1314BST08 1,1/2″ 32 15 6,5 1314BA12 1314BN12 1314BE12 1314BV12 1314BST12 2″ 38 23 7,3 1314BA16 1314BN16 1314BE16 1314BV16 1314BST16

Note: In teflon seat constructions, the piston is made out of stainless steel AISI316 and its maximum working pressure with saturated steam is 10 bar (180ºC).

 

General dimensions

fA	B	C	fD	E	F	G
3/4″	150	32	76	100	80	113
1″	157	41	90	122	89	120
1,1/2″2″	173	49	100	139	97	136

Measurements: mm.

 

NPT Connections

Add suffix “T” to Catalog N.

Example: 1314BA06AT.

Special Constructions

Stainless steel body:

· AISI304: change letter B or BS for S in the catalog number. Example: 1314SA08, 1314ST08.

· AISI316: change letter B or BS for I in the catalog number. Example: 1314IA08, 1314IT08.

Coils

A.C. 50 Hz: 28 W: up to 155ºC, S28F type. up to 180ºC, S28H type, for 12V, 24V, 110V, 120V, 220V y 240 V.

A.C. 60 Hz: 30 W: up to 155ºC, S30F type. up to 180ºC, S30H type, for 12V, 24V, 110V, 120V, 220V y 240V.

D.C.: 48 W: up to 180ºC, S48H type, for 12V, 24V, 110V y 220 V.

Options

· Weather proof housing.

Add prefix Y to valve catalog.

Example: Y1314BST08A.

· Explosion and weather proof housing.

Add prefix Z to valve catalog.

Example: Z1314BST08A.

· Manual operation: on the main orifice.

Add prefix -M to catalog number. Example: Y1314BST08-M.

Recommendations for the installation

Place a strainter with a porosity £ 100 m. upstream of the valve.

Mount the valve only on a horizontal pipeline with the coil upright.

The valve input pressure must always be equal or greater than the output pressure.

Applications according to the seat material

Seat material	Acrylo nitrile	NeopreneÒ	Ethyl- Propylene	VitonÒ	TeflonÒ
Maximum temperature	+80ºC	+80ºC	+150ºC	+180ºC	+180ºC
Uses	Water, air, light oils, kerosene. Low and medium vacuum.	Oxygen, alcohol, argon, other non-corrosive light gases and liquids. Freon 12.	Water steam, hot water, acetone.	Benzene, naphta, aromatics, etc. Hot gases. High vacuum, gasoil.	Steam, hot oils, corrosive fluids.